Comments on: Fixing HP StorageWorks P2000 G3 MSA SAN

By: Matt Dubay

Matt Dubay — Tue, 10 Sep 2024 18:02:52 +0000

Does anyone out there have the “TS250P003” firmware for the HP P2000 G3?

By: Thales

Thales — Tue, 08 Nov 2022 15:06:17 +0000

dont know if what u are looking for is it but u can only type ” clear events” on cli ….used usb to mini-usb with some driver that i found….it sets some COM and u need to verify witch COM is “emulated” set COMxx and 9600 8 n 1 like almost all type of quips….hope i helped u

By: Bjorn

Bjorn — Wed, 10 Aug 2022 12:35:32 +0000

In reply to Mike W. Is there anyone who has tried larger disks than 8TB with the TS252P006.bin-firmware?

By: steven Long

steven Long — Fri, 13 May 2022 23:34:27 +0000

Hi again,
I found someone had uploaded the older firmware and the newest firmware here.
Please can you download the files and re-upload them here for anyone else visiting
https://files.mclhosting.com/downloads/Drivers%20AND%20Firmware/SANs/HP%20P2000%20MSA/Firmware/Storage%20Controller/P2000i%20G3/

And do you have a ko-fi.com I would buy you a coffee!

Many Thanks

By: steven Long

steven Long — Fri, 13 May 2022 13:50:43 +0000

Thank you so much for this! you are a Hero!

By: Kent Chen

Kent Chen — Mon, 13 Sep 2021 23:33:09 +0000

In reply to Marc Rosenthal. It's been so long so I don't recall exactly. Basically the exe file is the HP version of the compressed file. You don't need it to update the firmware. You need the bin file instead.

By: Marc Rosenthal

Marc Rosenthal — Mon, 13 Sep 2021 16:08:02 +0000

Where can I find cp031212.exe?

By: Shi-Ming

Shi-Ming — Thu, 13 May 2021 07:01:18 +0000

Thank you very much. The 7z file works (update from TS230P007 to TS252P005). Now I can login with IE11. By the way, one of the controllers was malfunctioning after flashing the firmware but was fine after I switched off and on the power.

By: Peterli

Peterli — Thu, 18 Mar 2021 09:03:36 +0000

In reply to 1jctech1. Where should i look for this keyword? Could you provide me a direct-download to those files? Thank you so much.

By: Colin Scott

Colin Scott — Sat, 06 Mar 2021 09:44:24 +0000

In reply to Danny.

Under “Configuration” –> “Advanced Settings” –> “Firmware” make sure that “Partner Firmware Update” is selected and try the update again.